Nickel HR Reagent 1

Overview

Nickel HR reagent 1 measure nickel, which arrives from plating baths, rinse water and some alloy corrosion. It is a consented discharge parameter, so the test is normally run to prove an effluent plant is holding its limit.

Key features

• Reads nickel for plating effluent and discharge compliance
• Ready-made reagent, so there is no weighing or dilution on the bench
• Supplied in the 65 ml size, item code PL65NickHR1

Nickel HR reagent 1 specifications

Applications

Electroplating and metal finishing effluent, alloy corrosion investigations, industrial discharge compliance, and effluent plant performance checks.

Why buy nickel HR reagent 1 from Hadron Group

Hadron Group supplies water treatment chemicals, dosing equipment and analytical products throughout South Africa and the SADC region. We hold nickel HR reagent 1 in stock, we can supply the matching photometer, cuvettes and spares, and our technical team will help you settle on the right test set for your plant. Browse the full reagent range or ask us for a quote.

Frequently asked questions

When is a nickel test needed?
Mostly on plating and metal finishing effluent, where nickel carries a tight discharge limit and the treatment plant has to be shown to be working.

Does this reagent work on its own?
Several photometric methods use two or three reagents in sequence. Check which components your method lists, and we will make sure the set is complete before it ships.

How should liquid reagents be stored?
Cool, dry and out of direct sunlight, with the cap firmly closed. Note the batch and expiry on the bottle, and work through the oldest stock first.