Standard Shipment
3 - 5 working days
IMPORTS
6 - 8 Weeks
PVDF Dosing Pump Head Set 50V – LARA 5 L/h & 10 L/h, OPTIMA
R2,988.56 incl. VAT
Portable Multi-Parameter Water Analyser M310F – pH, EC, ISE, DO
R42,443.80 incl. VAT
Portable Conductivity / TDS Meter EC210E – 0–200 mS/cm
R15,197.42 incl. VAT
Portable conductivity meter for 0.00 µS/cm to 200 mS/cm, TDS to 300 g/L and temperature, with automatic standard recognition, auto-hold, 200-result memory and an IP65 body. For boreholes, RO plants, cooling towers and effluent.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 25.5 × 8 × 3.5 cm |
Description
Overview
The EC210E is a portable conductivity meter that also reads TDS and temperature. In other words, it gives the three numbers a water treater checks first on a borehole, an RO permeate line or a cooling-tower blowdown. It auto-ranges from 0.00 µS/cm to 200 mS/cm.
In addition, it recognises the standard 84 µS/cm, 1413 µS/cm and 12.88 mS/cm calibration solutions automatically. It holds the reading once it is stable and stores 200 results per parameter. Finally, the IP65 body and the rechargeable battery are built for field use.
Key features
- LCD display screen, 3.5 inches
- Multi-reading feature allows auto-read and continuous-read
- Automatic/manual temperature compensation ensures accurate results
- Auto-hold feature senses and locks the measurement endpoint
- Data capacity of up to 200 sets for each parameter
- Automatic standard recognition: 84 µS/cm, 1413 µS/cm and 12.88 mS/cm
- IP65 waterproof; auto power-off and factory-reset functions
Portable conductivity meter EC210E — specifications
| Parameters | Conductivity, TDS, temperature |
|---|---|
| Conductivity range | 0.00 µS/cm to 200 mS/cm |
| Conductivity resolution | 0.01 µS/cm minimum, varies with range selection |
| Conductivity accuracy | ±1.0 % FS |
| Reference temperature | 25 °C |
| Calibration points | Up to 1 |
| Standard recognition | 84 µS/cm, 1413 µS/cm, 12.88 mS/cm |
| TDS range | 0.00 mg/L to 300 g/L |
| TDS resolution | 0.01 mg/L minimum, varies with range selection |
| TDS accuracy | ±1.0 % FS |
| Temperature range | -5 to 110 °C (23 to 230 °F) |
| Temperature resolution | 0.1 |
| Temperature relative accuracy | ±0.2 |
| Reading modes | Auto Read, Continuous |
| Reading prompts | Reading, Stable, Locked |
| Temperature compensation | ATC, MTC |
| Data storage | 200 results each |
| Input | Conductivity with temperature probe — 5-pin aviation connector |
| Backlight | Yes |
| Auto shutdown | 300, 600, 1200, 1800, 3600 s, off |
| IP rating | IP65 |
| Power | Rechargeable lithium battery; AC adapter 100–240 V AC input, 5 V DC output |
| Dimensions | 80 × 255 × 35 mm |
| Weight | 400 g (0.88 lb) |
| Item code | EC210E |
Specifically, the table lists the manufacturer’s ratings. Therefore, ask us if your application needs a value that is not shown.
Where to use the portable conductivity meter EC210E
The portable conductivity meter serves borehole and municipal supply surveys, reverse-osmosis feed and permeate checks, and cooling-tower and boiler cycles of concentration. In addition, it measures effluent and irrigation-water salinity and supports laboratory quality control.
Why buy from Hadron Group
Hadron Group has supplied water-treatment chemicals, dosing equipment and analytical instruments from Pretoria since 1999. Our team uses these meters on site every week, for example for jar tests and plant surveys. As a result, we can advise on the right electrode, calibration standards and maintenance routine for your water. In addition, we support the meters across South Africa and the SADC region, with matching buffers, standards and probes.
Frequently asked questions
Which standard should I use to calibrate the portable conductivity meter EC210E?
Calibrate close to the range you measure. For example, use 84 µS/cm for permeate and clean water, 1413 µS/cm for most potable and process water, and 12.88 mS/cm for brines and cooling-tower blowdown. Calibration standards are available from us.
Does it measure TDS directly?
The meter calculates TDS from conductivity with a settable factor. It then displays TDS in mg/L or g/L, up to 300 g/L.
Related: Portable Dissolved Oxygen Meter DO210E · Portable pH Meter PH210E · all water-analysis meters.
Shipping & Delivery
Standard Shipment
Related products
