Molybdate Reagent 1

Overview

Molybdate reagent 1 measure molybdate, both as a corrosion inhibitor in closed circuits and as the inert tracer used to check that an inhibitor programme is dosing at the intended rate. Because molybdate is not consumed by the system, tracking it separates a dosing fault from a demand problem.

Key features

• Serves as inhibitor control and as a dosing tracer in closed circuits
• Ready-made reagent, so there is no weighing or dilution on the bench
• Supplied in the 65 ml size, item code PL65Moly1

Molybdate reagent 1 specifications

Applications

Closed heating and chilled water circuits, cooling systems on molybdate inhibitor programmes, and dose-rate verification on inhibitor packages.

Why buy molybdate reagent 1 from Hadron Group

Hadron Group supplies water treatment chemicals, dosing equipment and analytical products throughout South Africa and the SADC region. We hold molybdate reagent 1 in stock, we can supply the matching photometer, cuvettes and spares, and our technical team will help you settle on the right test set for your plant. Browse the full reagent range or ask us for a quote.

Frequently asked questions

Why is molybdate used as a tracer?
It is not consumed or removed by the system, so the concentration in the circuit reflects exactly how much product has been dosed and how much dilution has occurred.

Does this reagent work on its own?
Several photometric methods use two or three reagents in sequence. Check which components your method lists, and we will make sure the set is complete before it ships.

How should liquid reagents be stored?
Cool, dry and out of direct sunlight, with the cap firmly closed. Note the batch and expiry on the bottle, and work through the oldest stock first.